Maretron MBB100 Bedienungsanleitung PDF herunterladen (Seite 14)

MBB100 User’s Manual

Figure 11 – Configuration Dialog

c. Uncheck the “Use DHCP” box to indicate that your LAN does not use DHCP.

d. In the “IP Address” field, enter the IP address you wish to assign to the MBB100.

e. In the “Netmask” field, enter the netmask value used on your LAN (in most cases, this value

will be “255.255.255.0”).

f. In the “Gateway” field, enter the IP address of the default gateway of your LAN.

g. In the “Name Server” field, enter the IP address of a DNS (Dynamic Name Service) Server

used on your LAN.

h. Click the “Update” button to make these changes permanent. The screen will go blank for a

few seconds while this is being done.

Page 10 Revision 1.0

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Keine Kommentare

Maretron MBB100 Bedienungsanleitung Seite 14