Maretron SIM100 Bedienungsanleitung PDF herunterladen (Seite 10)

SIM100 User's Manual

SIM100 Screw Terminals

Monitored switch

1 2 5 4 3 6 7 8 9 10 11 12

SW1A

SW2B

SW1B

SW2A

SW3A

SW3B

SW4A

SW4B

SW5A

SW5B

SW6A

SW6B

Figure 4 – Switch Without End of Line Resistor Connection Diagram

2.4.3 Checking Connections

Once the NMEA 2000

connection and switch connection(s) to the SIM100 have been

completed, check to see that information is being properly transmitted by observing an

appropriate NMEA 2000

display. If you don’t see switch indicator status, refer to Section 4,

“Troubleshooting”.

2.5 Configuring the SIM100

The SIM100 will transmit data over the NMEA 2000 network as it is shipped from the factory;

however, it may require configuration, depending on the type of switch monitored. There are

several configurable items within the SIM100, which are detailed in the remainder of this

section.

You configure the SIM100 using a Maretron DSM250 display or other NMEA 2000

display

unit that is capable of configuring the SIM100. Please refer to the Maretron DSM250 User’s

Manual for details.

2.5.1 Device Instance

NMEA 2000

provides a unique device instance for each switch monitoring device on a vessel.

This value should be programmed in each SIM100 so that each SIM100 is associated with a

unique device instance number. The default instance number is 0, which is used to indicate the

first SIM100 that is hooked to the network. Subsequent SIM100s connected to the network

would be numbered 1, 2, and so on.

Page 6 Revision 1.2

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Keine Kommentare

Maretron SIM100 Bedienungsanleitung Seite 10