Maretron SIM100 Bedienungsanleitung PDF herunterladen (Seite 7)

Revision 1.2 Page 3

®®

3. The SIM100 is temperature-rated to 55°C (130°F), so it should be mounted away from

engines or engine rooms where the operating temperature exceeds the specified limit.

2.3 Mounting the SIM100

Attach the SIM100 securely to the vessel using the included stainless steel mounting screws or

other fasteners as shown in Figure 1 below. Do not use threadlocking compounds containing

methacrylate ester, such as Loctite Red (271), as they will cause stress cracking of the plastic

enclosure.

Figure 1 – Mounting the SIM100

2.4 Connecting the SIM100

The SIM100 requires two types of electrical connections: 1) the NMEA 2000

connection (refer

to Section 2.4.1), and 2) the switch connections, which are described in Section 2.4.2.

2.4.1 NMEA 2000

Connection

The NMEA 2000

connector can be found on the side of the enclosure. The NMEA 2000

connector is a round five pin male connector (see Figure 2). You connect the SIM100 to an

NMEA 2000

network using a Maretron NMEA 2000

cable (or compatible cable) by

connecting the female end of the cable to the SIM100 (note the key on the male connector and

keyway on the female connector). Be sure the cable is connected securely and that the collar

on the cable connector is tightened firmly. Connect the other end of the cable (male) to the

NMEA 2000

network in the same manner. The SIM100 is designed such that you can plug or

unplug it from an NMEA 2000

network while the power to the network is connected or

disconnected. Please follow recommended practices for installing NMEA 2000

network

products.

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Keine Kommentare

Maretron SIM100 Bedienungsanleitung Seite 7