Maretron Alarm Module ALM100 Bedienungsanleitung PDF herunterladen (Seite 356)

14 Video and Cameras

N2KView version 2.5 introduces a video component that may be used to monitor

cameras connected to the N2KView computer using the ship’s Ethernet network.

The NMEA2000 bus is not used to transfer the camera video streams or to

control the cameras.

Video Monitoring requires the optional Video Module to be licensed.

Having the video display embedded within N2KView has the advantage that the

user can see the video and the gauges simultaneously, and all the N2KView

Alert monitoring is active, with the active alerts always visible at the bottom of the

screen.

The following IP cameras have been tested with N2KView.

• AXIS 212 PTZ

• AXIS 215 PTZ

• AXIS P3301

• AXIS Q7401

• AXIS M3113 PTZ

• any other AXIS camera supporting the VAPIX™ protocol.

In addition, analog cameras may be connected to an Axis video server, which is

then connected to the N2KView computer using Ethernet.

• AXIS 241S: This is a Single Channel Encoder (Used to convert analog camera

(NTSC, PAL) to Internet Protocol (IP))

• AXIS 240Q: This is a Four Channel Encoder.

• AXIS 241Q: This is a Four Channel Encoder.

Finally, a USB camera may be connected directly to the computer, although this

has limitations. (1)The USB camera must be located close to the computer due

to the limitation on the cable length. (2)The image from the USB camera will only

be available on one screen, and may not be transmitted to another computer.

Revision 4.0.2 Page 356

1 2 ... 351 352 353 354 355 356 357 358 359 360 361 ... 379 380

Keine Kommentare

Maretron Alarm Module ALM100 Bedienungsanleitung Seite 356