Maretron Alarm Module ALM100 Bedienungsanleitung PDF herunterladen (Seite 74)

100

101

9.4.4.2.3 IP Address

This field is disabled if the use DHCP box is checked.

This is the IP Address (see section 8.2) for this MBB100, MBB200C, TSM800,

TSM800C, TSM1330, TSM1330C or DSM800.

9.4.4.2.4 Netmask

This is a mask used to divide an IP Address into subnets. Basically it tells the

computer how much of the IP Address defined the network, and how much may

be used by computers on the network. For most networks the first three parts of

the IP Address define the network (i.e. every computer on the network must have

the same values) and the last part defines the computer (i.e. every computer on

the network must have a different value). Where the value 255 appears in the

netmask, the values define the network and must be the same.

The most common value is 255.255.255.0.

9.4.4.2.5 Default Gateway

This is the IP Address of the router.

9.4.4.2.6 Default DNS

This is the IP address of a computer on the Internet that can identify and locate

computer systems and resources on the internet.

9.4.4.2.7 Update

Pressing this button will cause N2KView to exit, update the Network Parameters

on the computer, and then restart.

Revision 4.0.2 Page 74

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 379 380

Kommentare zu diesen Handbüchern

Keine Kommentare

Maretron Alarm Module ALM100 Bedienungsanleitung Seite 74

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Maretron Alarm Module ALM100