Maretron Alarm Module ALM100 Bedienungsanleitung PDF herunterladen (Seite 80)

• USB – This is only displayed if a USB100 is available. You will connect

through a USB100 connected to the same PC. No other parameters are

required. It is not possible to connect to a USB100 from a Mac.

• LAN – You will connect through an IPG100 connected to the same

network as the computer. The IPG100 will be identified by its serial

number, and N2KView will find it on the network even if its IP Address

changes.

The serial number of the IPG100 and the N2KServer Password (from the

IPG100) must be entered.

• WAN – You will connect through an IPG100 connected on the same

network, or on another network through Internet gateways and bridges.

The IPG100 will be identified by its IP Address, or the address of a Port on

a gateway that will forward messages to the IPG100. This is the most

complex type of connection to set up an generally requires the services of

an Internet Technician.

The IP Address (or Hostname) and port number on the gateway, and the

N2KServer Password (from the IPG100) must be entered.

• Cloud – You will connect through the Maretron Cloud Server on the

Internet. Both the computer and IPG100 must have internet access. The

IPG will identify itself to the Maretron Cloud Server through the serial

number of the Dongle plugged into the IPG100, or (if it does not have a

Dongle) the Serial Number of the IPG100 itself.

The Cloud Username and N2KServer Password (from the IPG100) must

be entered.

9.4.5.1.6 IP Address / Hostname (WAN only)

Please set this field to the Hostname or IP address of the IPG100 to which you

wish to connect.

9.4.5.1.7 Port (WAN only)

Please leave this field at the default setting of 6544, unless you have a router

between N2KView and N2kServer set up with Port translation.

Revision 4.0.2 Page 80

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 379 380

Keine Kommentare

Maretron Alarm Module ALM100 Bedienungsanleitung Seite 80