Maretron Alarm Module ALM100 Bedienungsanleitung PDF herunterladen (Seite 56)

• 100 GByte per month – This should be suitable for users with high remote video

requirements.

Once your contract is approved, enable Cloud Services on the IPG100, using

N2KAnalyzer or a DSM250. At this point the IPG100 will start trying to make a

connection to the Cloud Server. Data from the NMEA2000 bus will not be

transmitted to the Cloud Server when no N2KView clients are connected, but

there will be some data transmission to manage the link.

On the N2KView Client, enable Cloud Services in the Connection Dialog, and

enter the name you specified in the account. If N2KServer is protected with a

password (recommended), then this password must be entered in the

Connections Dialog.

Add controls and alerts to N2KView so that you can monitor your use of

bandwidth.

8.3 NMEA 2000 Considerations

This section describes some requirements for the NMEA 2000 networks to be

monitored with N2KView.

8.3.1 Instancing

The one aspect of NMEA 2000 that you need to be aware of as a user of

N2KView is the concept of instance numbers, or instancing. To enable

parameters from different devices to be distinguished, an instance number is

associated with the source of each parameter. This may be done as a Device

Instance or a Data Instance, depending on the message format used to transport

the data on the NMEA2000 bus. The user does not need to know whether Device

Instancing or Data Instancing is used to configure N2KView. When configuring

each component on the display, the instance number associated with the source

of the data should be known to ensure that the component is monitoring the

correct instance of the parameter.

For example: when configuring a control to monitor the Port Engine Revs, the

instance number should be set to 0; setting it to 1 would monitor the Revs of the

Starboard Engine.

Revision 4.0.2 Page 56

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 379 380

Keine Kommentare

Maretron Alarm Module ALM100 Bedienungsanleitung Seite 56